Its all about little Cara

My last roll from my Zorki of my little one before I hit the streets.  I now feel slightly more confident then a month ago and hopefully I get my exposures right.

Actually I was very surprise by the outcome as somehow, don’t know why this roll not as grainy as before. Perhaps its was the film, Fuji C200.

Don’t block me from watching telly.

Gimme a hug.

You have to admit… I’ve got style.

Really like the DOF of the Zorki 4 here at f2.  Really impressive.

Here are the last few shots.

And lastly, the ever famous blur Cara look.

Hope you guys like these series of Cara.  Here’s a parting shot from the 3 stoogers.  Don’t they look alike ?

Advertisements

The curious case of expensive films

Funny title, but really not that funny to me.. 😦 .. Sheesh …  Whenever I load in an ‘expensive’ film, it’ll fail on me.  The other time on my Yashica GSN was a Kodak BW400CN.  It snapped on me, and me being a noob open it, stared at it, and had my entire film spoilt due to my stupidity.

This time, for some reason, my Kodak Ektar 100 got stuck while shooting halfway on my Zorki 4.  Darn it …  You know these films cost like S$9 bucks per roll.  Arghhhhhh !!!!.. so again, being the noob, I roll back my film, tried to get it unstuck before I begin shooting again, knowing I would get multiple exposures, but I didn’t have much choice.  So what happened ?  The below happened.  Arghh !!!

But I carried on and got a few of these.

But again, being the super noob, I was afraid of wasting the entire film, as either my Zorki 4 film counter is spoilt or I don’t know how to use it, hence I couldn’t estimate at which number of shot I screwed up, so I didn’t want to have too many multiple exposures, hence I stopped.  But being the silly noob again, I wasted half my roll unexposed due to my fear. Arghhhhhhhhhhhhhh!!!!.. Nevermind.. Try again .. everytime something happens, we learn and get better right ?

So at the same time, I also finished my roll on my Yashica GSN.  Now my last time, I had it to the max before tried to unwind and my film snapped.  This time I kept it at about the 36 shot mark before I unwind my roll and guess what ?  The thing snapped again !!!!.. Arghhhhh !!!!….  Well, this time, I left it there, and brought it to Triple D Minilab Center to take it out for me.  Hey .. I learned right ?

Anyway, here are some from my Yashica GSN.

Apologies for the same content over my last few posts as recently really am busy with work, hence the only time I have left to shoot is during weekends, where the family demands my time.  Trying to squeeze some lunch hour this week to see if I can take some interesting happenings around my work area.

I did however manage to catch some home chinese tuition with the kids by the missus.  Here are some of the shots.  Can be quite blur still as I’m have yet to send my Yashica for CLA (Clean, Lubricate, Adjust) and have a hazy Viewfinder.

Once again, thanks for dropping by, and hope to hear your honest comments.

Street next.

Zorki 4

My Zorki 4 arrived in my mail last week.  Was packed quite securely.

This camera is an interesting one.  It has no light meter, fully manual and has interchangeable lens.  It’s an LTM screwed on mount.

Unlike my Yashica GSN, because it has no light meter, I had to guess my exposure setting.  Being a newbie, that resulted in a few washout over exposed shots.  Well…. not a few, but almost half of my first roll went that way.  I adopted the Sunny 16 rule during Kyeron’s recent swimming trip, but either I did something wrong, or what, but all my shots were over exposed.  Nevermind, I’ll try again.

Here’s a few pictures from my first and second roll with it.  Took it when Natty had her ballet lessons @ i12.

Here are some shots taken from home where the light was much better.

More to come, as I’m sending my other 2 rolls for processing today.  On recommendation from a fellow Clubsnap member, there’s another film developing shop at Burlington Square by the name of Triple D Minilab Centre, which is much cheaper than Konota.

Yashica GSN

So i went for our honeymoon to Hokkaido, and I was chatting with a fellow hobbyist, and he introduced me to cheap film Rangefinders.  Ever since being poisoned by the Leica M9, I was determine to get a cheap Rangefinder to try it out.  So the tour Kaki recommended me the Russian Zorki.

So when I came back, I googled and searched.  From Russian Rangefinders like Zorki, Fed and Kiev, to Japanese Rangefinders like Canon QL 17, Konica Auto S2/S3, and Yashica GSN.  Then I set a budget not exceeding a 200 bucks, and went on eBay to check it out.

Found a great Yashica GSN, and bought it for about S$120.  I just love the look of the Yashica.  I knew it would be slightly heavy, but hey, my 5DM3 ain’t a feather too.  I also bought a Zorki 4 for about S$80 bucks.  I wanted to try a full manual interchangeable lens camera hence the Zorki 4.

So, the Yashica GSN arrived last week and I couldn’t wait to run a few rolls in it, well, that is if I know how to.

Here’s a look at my Yashica GSN.  (By the way, you do know in the current Spiderman 2012 movie, Peter Parker was using the Yashica GSN as shown here)..  It came with the Sunpac Auto 101 flash kit.

So went over to Peninsula to recee and tried Konota.  Heard some good reviews from Clubsnap and the guy I spoke to was very friendly.  I was a super noob and he was patient in his explaination, on what is slide and negative, and what is Velvia slide.  He recommended me to try out ISO 400 films first as it was easier if I had under expose my shots.

So I bought a Kodak 200, 400 and a 400 B&W as I always love to shoot in B&W.  Hey, if I can’t get a Leica M Monochrome, at least I can get a roll of B&W to act like one yeah ?  Ok Ok, don’t start on the M Monochrome’s sensor not being sensitive to color, hence B&W is much sharper etc.  I know that stuff… well, sort off.

Because the camera supports the olden mercury battery, and no one else will sell it now for fear of poisoning oneself, I bought a battery adaptor from Yashica Guy, so that I can use a common current battery, but it does seem to take AGES for it to arrive hence I am force to shoot at 1/500 for now and it arrived finally.  Initially had some problems with it, but managed to get it to work perfectly.  With the adaptor, all I need is a 4LR44 battery together with the adaptor and it will work.  You can also use 4 small LR44 batteries too.  I reckon it’s the same.  How do I know ?  Erm .. well….  one is 4LR44, and the other is 4 x LR44….  so……..  hhm……

Anyway, so I tried to insert my first roll in (which was the 400). Can’t be that hard can it?  Make sure the holes get into the teeth, wind, and that’s it.  right ?  Anyway, tried for 20 mins, and just couldn’t get it to wind in.  Went over to P&G Photographic Centre and spoke to a Mr Andrew.  I told him i couldn’t get my film in and perhaps it was missing a part.  He opened it and told me I didn’t do it properly, and showed me how to.  I did everything right, but missed the most important step, which is to clip the film into the holder before you wind.  ARGHHH !!!!….  Anyway, so I did it finally, and here’s my virgin few shots, which must definetely be the ever gorgeous missus. (All photos are directly scanned by Konata, and I did not do any post processing.)

We had dinner at the awesome Orchard Yong Tau Fu.  Trust me, it’s one of the best Yong Tau Fu you can find in Singapore.

Here are some sample of lovely Cara, my youngest one.  Love the bokeh of the f1.7.

Then my second girl came along, and wanted to join in.  Here are some shots of Natasha and Cara.

Pity the last picture was not sharp.  Still struggling with the Rangefinder as it was quite hazy.  Would probably get it CLA with P&G.

Wasn’t too impress with the 4-Base scanning, hence bought a second hand Epson V330 so hopefuly, it can do better.

Hope I can do better with the B&W currently loaded in the GSN.  Still waiting for my Zorki 4.  Hopefully I can get it by this week.

I too hope I can get more Hokkaido images up by the coming week too.